Soru & Cevap

Arduino kod birleştirme ...

01.02.2023 - 02:45

bu kodu nasıl birleştirebilirim? yani her iki sensörden de seri portta veri almak istiyorum.

31 Görüntülenme

4 Cevap

Sitedeki sorulara cevap verebilmek için giriş yapın ya da üye olun.

Profile picture for user mailliams3
mailliams3
03.02.2023 - 11:41

Bu kısmı anlamakta güçlük çekiyorum daha iyi bir açıklaması var mı?

Profile picture for user mailliams3
mailliams3
03.02.2023 - 11:41

Bu kısmı anlamakta güçlük çekiyorum daha iyi bir açıklaması var mı?

Profile picture for user endotermik
endotermik
02.02.2023 - 11:10
/*
Data processing example
This example shows how to process raw readings from the sensors to get acceleration in m/s^2,
angular velocity in dps (degrees per second) and magnetic flux density in T (Tesla).
*/

#include <MPU9255.h>// include MPU9255 library

#define g 9.81 // 1g ~ 9.81 m/s^2
#define magnetometer_cal 0.06 //magnetometer calibration 

MPU9255 mpu;

//process raw acceleration data
//input = raw reading from the sensor, sensor_scale = selected sensor scale
//returns : acceleration in m/s^2
double process_acceleration(int input, scales sensor_scale )
{
  /*
  To get acceleration in 'g', each reading has to be divided by :
   -> 16384 for +- 2g scale (default scale)
   -> 8192  for +- 4g scale
   -> 4096  for +- 8g scale
   -> 2048  for +- 16g scale
  */
  double output = 1;

  //for +- 2g

  if(sensor_scale == scale_2g)
  {
    output = input;
    output = output/16384;
    output = output*g;
  }

  //for +- 4g
  if(sensor_scale == scale_4g)
  {
    output = input;
    output = output/8192;
    output = output*g;
  }

  //for +- 8g
  if(sensor_scale == scale_8g)
  {
    output = input;
    output = output/4096;
    output = output*g;
  }

  //for +-16g
  if(sensor_scale == scale_16g)
  {
    output = input;
    output = output/2048;
    output = output*g;
  }

  return output;
}

//process raw gyroscope data
//input = raw reading from the sensor, sensor_scale = selected sensor scale
//returns : angular velocity in degrees per second
double process_angular_velocity(int16_t input, scales sensor_scale )
{
  /*
  To get rotation velocity in dps (degrees per second), each reading has to be divided by :
   -> 131   for +- 250  dps scale (default value)
   -> 65.5  for +- 500  dps scale
   -> 32.8  for +- 1000 dps scale
   -> 16.4  for +- 2000 dps scale
  */

  //for +- 250 dps
  if(sensor_scale == scale_250dps)
  {
    return input/131;
  }

  //for +- 500 dps
  if(sensor_scale == scale_500dps)
  {
    return input/65.5;
  }

  //for +- 1000 dps
  if(sensor_scale == scale_1000dps)
  {
    return input/32.8;
  }

  //for +- 2000 dps
  if(sensor_scale == scale_2000dps)
  {
    return input/16.4;
  }

  return 0;
}

//process raw magnetometer data
//input = raw reading from the sensor, sensitivity =
//returns : magnetic flux density in μT (in micro Teslas)
double process_magnetic_flux(int16_t input, double sensitivity)
{
  /*
  To get magnetic flux density in μT, each reading has to be multiplied by sensitivity
  (Constant value different for each axis, stored in ROM), then multiplied by some number (calibration)
  and then divided by 0.6 .
  (Faced North each axis should output around 31 µT without any metal / walls around
  Note : This manetometer has really low initial calibration tolerance : +- 500 LSB !!!
  Scale of the magnetometer is fixed -> +- 4800 μT.
  */
  return (input*magnetometer_cal*sensitivity)/0.6;
}

void setup() {
  Serial.begin(115200);// initialize Serial port

  if(mpu.init())
  {
  Serial.println("initialization failed");
  }
  else
  {
  Serial.println("initialization successful!");
  }
  
}

void loop() {
  //take readings
  mpu.read_acc();
  mpu.read_gyro();
  mpu.read_mag();

  ////process and print acceleration data////
  //X axis
  Serial.print("AX: ");
  Serial.print(process_acceleration(mpu.ax,scale_2g));

  //Y axis
  Serial.print("  AY: ");
  Serial.print(process_acceleration(mpu.ay,scale_2g));

  //Z axis
  Serial.print("  AZ: ");
  Serial.print(process_acceleration(mpu.az,scale_2g));


  ////process and print gyroscope data////
  //X axis
  Serial.print("      GX: ");
  Serial.print(process_angular_velocity(mpu.gx,scale_250dps));

  //Y axis
  Serial.print("  GY: ");
  Serial.print(process_angular_velocity(mpu.gy,scale_250dps));

  //Z axis
  Serial.print("  GZ: ");
  Serial.print(process_angular_velocity(mpu.gz,scale_250dps));


  ////process and print magnetometer data////
  //X axis
  Serial.print("      MX: ");
  Serial.print(process_magnetic_flux(mpu.mx,mpu.mx_sensitivity));

  //Y axis
  Serial.print("  MY: ");
  Serial.print(process_magnetic_flux(mpu.my,mpu.my_sensitivity));

  //Z axis
  Serial.print("  MZ: ");
  Serial.println(process_magnetic_flux(mpu.mz,mpu.mz_sensitivity));

  delay(100);
}






#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP085_U.h>

Adafruit_BMP085_Unified bmp = Adafruit_BMP085_Unified(10085);

void setup() {
  Serial.begin(9600);
  if (!bmp.begin()) {
    Serial.println("Could not find a valid BMP085 sensor, check wiring!");
    while (1);
  }
}

void loop() {
  sensors_event_t event;
  bmp.getEvent(&event);

  if (event.pressure) {
    float altitude = bmp.pressureToAltitude(1013.25, event.pressure, 0);
    Serial.print("Altitude: ");
    Serial.print(altitude);
    Serial.println(" meters");
  }
  delay(1000);
}

 

Profile picture for user f.erenyucal
f.erenyucal
02.02.2023 - 11:51

Merhabalar Alican! Yüklediğin zip dosyaları maalesef açılmıyor. Kodları yollarsan sana yardımcı olmak isterim :)

 

Teşekkürler

Alican Turan
02.02.2023 - 11:08
#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP085_U.h>

Adafruit_BMP085_Unified bmp = Adafruit_BMP085_Unified(10085);

void setup() {
  Serial.begin(9600);
  if (!bmp.begin()) {
    Serial.println("Could not find a valid BMP085 sensor, check wiring!");
    while (1);
  }
}

void loop() {
  sensors_event_t event;
  bmp.getEvent(&event);

  if (event.pressure) {
    float altitude = bmp.pressureToAltitude(1013.25, event.pressure, 0);
    Serial.print("Altitude: ");
    Serial.print(altitude);
    Serial.println(" meters");
  }
  delay(1000);
}

 

Alican Turan
02.02.2023 - 11:08
/*
Data processing example
This example shows how to process raw readings from the sensors to get acceleration in m/s^2,
angular velocity in dps (degrees per second) and magnetic flux density in T (Tesla).
*/

#include <MPU9255.h>// include MPU9255 library

#define g 9.81 // 1g ~ 9.81 m/s^2
#define magnetometer_cal 0.06 //magnetometer calibration 

MPU9255 mpu;

//process raw acceleration data
//input = raw reading from the sensor, sensor_scale = selected sensor scale
//returns : acceleration in m/s^2
double process_acceleration(int input, scales sensor_scale )
{
  /*
  To get acceleration in 'g', each reading has to be divided by :
   -> 16384 for +- 2g scale (default scale)
   -> 8192  for +- 4g scale
   -> 4096  for +- 8g scale
   -> 2048  for +- 16g scale
  */
  double output = 1;

  //for +- 2g

  if(sensor_scale == scale_2g)
  {
    output = input;
    output = output/16384;
    output = output*g;
  }

  //for +- 4g
  if(sensor_scale == scale_4g)
  {
    output = input;
    output = output/8192;
    output = output*g;
  }

  //for +- 8g
  if(sensor_scale == scale_8g)
  {
    output = input;
    output = output/4096;
    output = output*g;
  }

  //for +-16g
  if(sensor_scale == scale_16g)
  {
    output = input;
    output = output/2048;
    output = output*g;
  }

  return output;
}

//process raw gyroscope data
//input = raw reading from the sensor, sensor_scale = selected sensor scale
//returns : angular velocity in degrees per second
double process_angular_velocity(int16_t input, scales sensor_scale )
{
  /*
  To get rotation velocity in dps (degrees per second), each reading has to be divided by :
   -> 131   for +- 250  dps scale (default value)
   -> 65.5  for +- 500  dps scale
   -> 32.8  for +- 1000 dps scale
   -> 16.4  for +- 2000 dps scale
  */

  //for +- 250 dps
  if(sensor_scale == scale_250dps)
  {
    return input/131;
  }

  //for +- 500 dps
  if(sensor_scale == scale_500dps)
  {
    return input/65.5;
  }

  //for +- 1000 dps
  if(sensor_scale == scale_1000dps)
  {
    return input/32.8;
  }

  //for +- 2000 dps
  if(sensor_scale == scale_2000dps)
  {
    return input/16.4;
  }

  return 0;
}

//process raw magnetometer data
//input = raw reading from the sensor, sensitivity =
//returns : magnetic flux density in μT (in micro Teslas)
double process_magnetic_flux(int16_t input, double sensitivity)
{
  /*
  To get magnetic flux density in μT, each reading has to be multiplied by sensitivity
  (Constant value different for each axis, stored in ROM), then multiplied by some number (calibration)
  and then divided by 0.6 .
  (Faced North each axis should output around 31 µT without any metal / walls around
  Note : This manetometer has really low initial calibration tolerance : +- 500 LSB !!!
  Scale of the magnetometer is fixed -> +- 4800 μT.
  */
  return (input*magnetometer_cal*sensitivity)/0.6;
}

void setup() {
  Serial.begin(115200);// initialize Serial port

  if(mpu.init())
  {
  Serial.println("initialization failed");
  }
  else
  {
  Serial.println("initialization successful!");
  }
  
}

void loop() {
  //take readings
  mpu.read_acc();
  mpu.read_gyro();
  mpu.read_mag();

  ////process and print acceleration data////
  //X axis
  Serial.print("AX: ");
  Serial.print(process_acceleration(mpu.ax,scale_2g));

  //Y axis
  Serial.print("  AY: ");
  Serial.print(process_acceleration(mpu.ay,scale_2g));

  //Z axis
  Serial.print("  AZ: ");
  Serial.print(process_acceleration(mpu.az,scale_2g));


  ////process and print gyroscope data////
  //X axis
  Serial.print("      GX: ");
  Serial.print(process_angular_velocity(mpu.gx,scale_250dps));

  //Y axis
  Serial.print("  GY: ");
  Serial.print(process_angular_velocity(mpu.gy,scale_250dps));

  //Z axis
  Serial.print("  GZ: ");
  Serial.print(process_angular_velocity(mpu.gz,scale_250dps));


  ////process and print magnetometer data////
  //X axis
  Serial.print("      MX: ");
  Serial.print(process_magnetic_flux(mpu.mx,mpu.mx_sensitivity));

  //Y axis
  Serial.print("  MY: ");
  Serial.print(process_magnetic_flux(mpu.my,mpu.my_sensitivity));

  //Z axis
  Serial.print("  MZ: ");
  Serial.println(process_magnetic_flux(mpu.mz,mpu.mz_sensitivity));

  delay(100);
}